Post by Edmon E. Gabonilas on Nov 29, 2015 11:35:21 GMT 8
Update procedure:
Before proceeding, please prepare the following:
1. Flare X (in Kitkat version) with a charged battery of at least 50%
2. SD card preferably 8gb empty (formatted)
3. MicroUSB cable
4. Computer with internet connection
Procedure:
1. Download Flare X upgrade on this link
2. Insert your SD Card to your Flare X
3. Copy the Update.zip from the compressed file to your SD card using a micro USB cable plugged into your computer
Note:
1. Please do not unzip the Update.zip. Just copy and past it to your SD card.
2. Make sure that it is only the file copied into your SD card.
3. Turn off your Flare X
4. When the Flare X is turned off, press power button + volume up for 5 seconds. Select boot mode will appear.
5. To navigate, use volume up to scroll up to scroll, and volume down to select.
6. Select recovery, and an Android with an exclamation point will appear.
7. Press Volume down + Power on to proceed in the recovery process
8. Press Volume down to scroll up and down and choose the apply update from SD card, and then press volume up.
9. You will see another page,a nd use power down to choose the Update.zip and press power up to confirm
10. You can now see the word install/ SD card and just wait for a few minutes while the system is installing the update.
11. Once the system is done upgrading, you will see in the lower part of the screen “install from SD card complete”
12. Now you can see the Android system recovery then choose the reboot system now by pressing volume up and once the system is done rebooting, you can now enjoy your Flare X Lollipop 5.1 version. You can also delete the update.zip after the process is done.
Source: www.gadgetpilipinas.net/2015/11/official-cherry-mobile-flare-x-lollipop-update-now-avaialble/
Before proceeding, please prepare the following:
1. Flare X (in Kitkat version) with a charged battery of at least 50%
2. SD card preferably 8gb empty (formatted)
3. MicroUSB cable
4. Computer with internet connection
Procedure:
1. Download Flare X upgrade on this link
2. Insert your SD Card to your Flare X
3. Copy the Update.zip from the compressed file to your SD card using a micro USB cable plugged into your computer
Note:
1. Please do not unzip the Update.zip. Just copy and past it to your SD card.
2. Make sure that it is only the file copied into your SD card.
3. Turn off your Flare X
4. When the Flare X is turned off, press power button + volume up for 5 seconds. Select boot mode will appear.
5. To navigate, use volume up to scroll up to scroll, and volume down to select.
6. Select recovery, and an Android with an exclamation point will appear.
7. Press Volume down + Power on to proceed in the recovery process
8. Press Volume down to scroll up and down and choose the apply update from SD card, and then press volume up.
9. You will see another page,a nd use power down to choose the Update.zip and press power up to confirm
10. You can now see the word install/ SD card and just wait for a few minutes while the system is installing the update.
11. Once the system is done upgrading, you will see in the lower part of the screen “install from SD card complete”
12. Now you can see the Android system recovery then choose the reboot system now by pressing volume up and once the system is done rebooting, you can now enjoy your Flare X Lollipop 5.1 version. You can also delete the update.zip after the process is done.
Source: www.gadgetpilipinas.net/2015/11/official-cherry-mobile-flare-x-lollipop-update-now-avaialble/